Toolbox

Prolyte Toolbox

Handy and essential item during any truss setup / dismantle job. This box contains two hammers and a ratchet.

5.00 Excl. VAT

Toolbox

For setting up and dismantling truss constructions, some items are essential. Of course you will need the truss, couplers, pins and safety clips. However, tools are just as important. Without a hammer, you won’t be able to fully connect the truss sections.

Contents

This toolbox contains 2 hammers of 500 grams and a special ratchet to discount or mount couplers where needed. These hammers are lightweights and therefor easy to use. These hammers are also perfectly ideal to remove pins from the inside out. Larger hammers are less suitable for this job. Whenever a set of couplers are connected to a truss section where its not desirable, you can disconnect the coupler by dismounting the pin with threaded end.  For this job you can use the spcial ratchet. The ratchet has a flexibel head and is therefor useable in all positions, making the job easier.

Tech specs

  • Brand

    HWC

  • Type

    Toolbox

  • Contains

    2x Hammer + 1x 13mm Ratchet

  • Dimensions

    320 x 260 x 125 mm (L x W x H)

  • Weight

    3.4 kg

Tips

Pins

Truss pins only need to go a far as the safetyclip hole into the truss. No need to hammer the pin completely through.

Video

Toolbox order

Handy and essential item during any truss setup / dismantle job. This box contains two hammers and a ratchet.

€ 5.00 Excl. VAT