3-Phase 32A Power Distributor

Showtec PSU-3202 MKII Power Distributor

For splitting a 32A power connection into usable power groups of 230V. Equipped with both schuko and 16A CEE connections for ultimate freedom.

25.00 excl. VAT

3-Phase 32A Power Distributor

It’s great to be able to use power current during events. You have a framed power supply don’t have to worry about just anyone connecting to your power supply. This isn’t the case when using 'normal' power sockets, which are often used at events. You might think nothing of quickly charging your phone or laptop using a wall socket at an event location. However, if every guest at your event does so, power consumption increases. If your equipment is connected to the same power group or groups, it can occur that the requested power is simply too much, causing the fuse to halt the power supply. Of course, you want to prevent this from happening which is why we always recommend using power current together with a power distributor.

Power current Connection

Many event venues do have a 32A power connection. Of course, this is not the largest and most powerful, but it’s sufficient to supply many events with all of their power needs. You can recognize this connection by its recognizable 5-pronged connection and red colour. You’ll also always find mention somewhere on the connection that it’s a 32A connection. However, you cannot directly connect audiovisual equipment to this power connection. This connection provides 400V and equipment is usually only suitable for use on 230V. To split this 400V, a special power distributor is required. This splits the power current into multiple connections of 230V, so that your equipment can be safely connected.

32A Power distributor

Lucky for you, we have the right power distributors in stock in our rental shop. This distribution box has a number of different connections. To begin with, it’s equipped with a 32A plug to connect to the location’s power connection. As far as the output is concerned, there are several possibilities. On the front there are two 16A CEE power connections. If you make use of these, the power connection is actually divided by the middle and you can still use 400V. On the backside you will find 6 'normal' schuko connections. These can be used to directly connect audiovisual equipment. Are you looking for a 10 or 20 metre power cable as well as a distributor? We can help you with that. Click on the link or take a look at the cables in the related items below.

Tech specs

  • Brand

    Showtec

  • Model

    PSU-3202 MKII

  • Colour

    Grey

  • Connector A

    32A CEE 5P Male

  • Connector B

    32A CEE (1x), 16A CEE (2x), Schuko (6x)

  • Examination

    NEN3140

  • Safety Standard

    IP20

  • Weight

    10.2 KG

  • Dimensions

    65.1 cm × 55.6 cm × 28.3 cm (W x D x H)

3-Phase 32A Power Distributor order

For splitting a 32A power connection into usable power groups of 230V. Equipped with both schuko and 16A CEE connections for ultimate freedom.

€ 25.00 excl. VAT